Mobile gas chromatograph
Measurement and evaluation of gases directly at your measuring points.
If your measuring station breaks down, is converted or has to be checked by a custodian, our mobile PGC is the optimal solution for you. You can use it to replace a measuring station within a short time or to generate temporarily required measured values.
Our measuring vehicle gives you the opportunity to check the composition of the gas directly on site at your measuring points. A PGC 9304 process gas chromatograph is installed on board the vehicle. We use it to measure your mixed gas and determine the following values:
Our mobile process gas chromatograph determines the composition of natural gas, upgraded biogas or mixtures of both every 3 minutes, even if hydrogen is added.
Our measuring vehicle gives you the opportunity to check the composition of the gas directly on site at your measuring points. A PGC 9304 process gas chromatograph is installed on board the vehicle. We use it to measure your mixed gas and determine the following values:
- Calorific value
- Heating value
- Standard density
- Density ratio
- Wobbe number
- Methane number (optional)
Our mobile process gas chromatograph determines the composition of natural gas, upgraded biogas or mixtures of both every 3 minutes, even if hydrogen is added.
Our services
With our new mobile gas quality measurement system we offer you:
- Verification by the weights and measures office of the gas quality values calculated via a reconstruction or calorific value tracking system
- Substitute value creation for gas quality measuring systems during maintenance, repair or conversion work
- Establishment of a fast substitute measurement in case of a plant malfunction
- Temporary testing of stationary gas quality systems
All we need from you is a connection to the measuring gas, we take care of the rest:
- Independent arrival and departure to the measuring point
- Weather-independent application possibilities
- Installation, commissioning and calibration by an RMG service technician
- Power supply via the on-board power supply system
- Stocking of the necessary calibration, test and verification gases in the vehicle
- Compliance with security policies in the public and non-public sector
- Short set-up times for change of location
- Automatic data processing with custody transfer recording and the possibility of remote data retrieval
Gas components measured by the weights and measures office
| Gas components | Measuring range [%]. |
|---|---|
Nitrogen | 0-25 |
Methane | 55-100 |
Carbon dioxide | 0-12 |
Ethane | 0-15 |
| Propane | 0-9 |
| i-Butane | 0-4 |
| n-Butane | 0-4 |
| i-Pentane | 0-0,3 |
| n-Pentane | 0-0,3 |
| Hexane | 0-0,3 |
| Oxygen | 0-5 |
| Hydrogen | 0-20 |
| Helium | 0-1 |
| Lorem | Lipsum |
| Calorific value (custody transfer) | 6,15 – 16,15 kWh/m3 |
| Standard density (custody transfer) | 0,58 – 1,26 kg/m3 |
| Lorem | Lipsum |
| Calorific value | |
| Wobbe number | |
| Methane number | |
| Lorem | Lipsum |
Quickly ready for use, completely self-sufficient, suitable for series production
All we need is a connection to the measuring gas. We bring the mobile PGC to your measuring point; and it remains there for the duration of the measurements. An RMG specialist sets up the mobile unit on site, commissions the process gas chromatograph and makes all the necessary settings for calibration.
The mobile PGC has its own power supply and a supply of calibration and test gases onboard. Recorded data is automatically stored, registered by the weights and measures office and are available for remote retrieval.
Thus, the mobile PGC offers you an ideal possibility for quick measurements on demand. Thanks to short changeover times, a change of location or a series of measured values can also be carried out without any problems.
The mobile PGC has its own power supply and a supply of calibration and test gases onboard. Recorded data is automatically stored, registered by the weights and measures office and are available for remote retrieval.
Thus, the mobile PGC offers you an ideal possibility for quick measurements on demand. Thanks to short changeover times, a change of location or a series of measured values can also be carried out without any problems.
Do you have any questions?
Feel free to contact us if you have any questions or need help. Our staff is always there for you.
+49 (0) 6033 897-0
info@rmg.com