TME 400-VM: Electronic Volumeter
The next generation of reliable technology.
With the TME400-VM series, RMG introduced the further development of the TRZ03-K volumeter into the market in 2018.
An electronic counter replaces the mechanical roller counter. This means that the volumeter does not just remain a volume counter, but also becomes a flowmeter. Both measured values can not only be displayed and output in analogue form, but are also available for serial transmission on a Modbus interface. This interface is also used to parameterize the device using RMGViewTME software.
This device works self-sufficiently for over 6 years with one set of batteries. Of course an external power supply is optionally available. The electronic counter also offers an error curve linearization, which allows an extension of the measuring range and a reduction of the measuring deviations.
An electronic counter replaces the mechanical roller counter. This means that the volumeter does not just remain a volume counter, but also becomes a flowmeter. Both measured values can not only be displayed and output in analogue form, but are also available for serial transmission on a Modbus interface. This interface is also used to parameterize the device using RMGViewTME software.
This device works self-sufficiently for over 6 years with one set of batteries. Of course an external power supply is optionally available. The electronic counter also offers an error curve linearization, which allows an extension of the measuring range and a reduction of the measuring deviations.
Device for volume and flow measurement for internal measurements
- Turbine meter with electronic totalizer
- Short design
- Display of volume and flow rate
- Battery operation (6 years), external supply optional
- Serial interface (Modbus)
- Current output optional (with external supply)
- Very good reproducibility
- Durable, low maintenance and robust
- Horizontal or vertical mounting position possible
- Electronic linearization of the error curve
- Special versions for corrosive gases (e.g. raw biogas)
- Operation / parameter setting via the RMGViewTME diagnostic software
- DIN-DVGW tested
Technical Product Information & Software
TME 400 VM/VC-EN
Data sheet, pdf (766kb)
EU-DoC_TME400VM_TME400VC_2023-02-10
Declaration of conformity (178 kb)
RMGViewTME_V3_0_2_2022-09-07
Software, zip 4mb, password: RMG
Operating instructions
TME 400 VM-EN
Operating instructions, PDF (8.0mb)
If you have any questions:
Electronic Volumeter TME 400-VM
Please contact us if you have any questions or need help. Our employees are always there for you.