Natural gas - gas quality measurement
You can use the gas chromatographs to analyze the components of natural gases and their mixed gases. They provide you with the gas composition required for further energy determination and precise natural gas measurements. Correlative systems can be used for simpler calorific value determination.
The following device families are available:
The following device families are available:
PGC 9300
The PGC 9300 gas chromatograph can be used to analyze the components of the gas composition of natural gas, biogas, gas from Power-2-Gas applications and their mixed gases. For each application, one of the different variants of the PGC is available for selection. With the gas components, the analysis computer further calculates values such as the calorific value, standard density, heating value and Wobbe index. The PGC is officially approved by the PTB for natural gas, biogas and natural gas with contents of O2 up to 5% and H2 up to 20%.
Gas Quality calorimeter
RGQ 5 / RGQ 3
RGQ 5 / RGQ 3
Combustionless measuring method, available in the following versions:
RGQ 511 Extended
These have been developed for different accuracies and gas compositions. Other gas compositions on request.
RGQ 511 Extended
- Viscosity and Thermal Conductivity Detector
- Viscosity, TCD and CO2 Sensor
- Viscosity and TCD Sensor and H2 Detection
- Viscosity, TCD, CO2 Sensor und H2 HW
These have been developed for different accuracies and gas compositions. Other gas compositions on request.
