Turbine meter TME 400-VCF / TME 400-VMF
TME400 -VCF turbine meter is the all-rounder with integrated volume corrector according to EN 12405-1
TME400-VMF turbine meter is the innovative one with electronic totalizer
With these series, the transition to the digital age for classic turbine meters used in custody transfer applications has been successfully completed: The meter movements comply with DIN/EN12261 in terms of metrological performance and overall length, which is a prerequisite for custody transfer approval. However, the simple electronic totalizer of the TME400-VMF or the integrated volume corrector of the TME400-VCF now provide the modern communication options, especially Modbus communication. The RMGViewTME software enables not only the parameterization of the devices but also the visualization of all measured data in trend graphics and also the readout of the integrated measured value and event archives.
The approvals from the calibration authorities for both series are already available.
The approvals from the calibration authorities for both series are already available.
Complete solution for gas volume measurement in custody transfer
- MID approved by NMI
- Meets or exceeds the requirements of DIN/EN 12261 for gas meters and DIN/EN 12405 for volume correctors
- Overall length 3xDN according to DIN/EN 12261
- Integrated temperature and pressure measurement
- Display of pressure, temperature, volume and flow rate, each in operating and standard status
- Integrated measurement archives
- Simple and inexpensive assembly, as installation work for pressure and temperature measurement is not required
- Battery operation (6 years), external supply optional
- Serial interface (Modbus)
- Current output optional (with external supply), optionally for flow rate, pressure or temperature
- Durable, low maintenance and robust
- Horizontal or vertical mounting position possible
- Electronic linearization of the error curve (with external supply)
- Special versions for corrosive gases (e.g. raw biogas)
- Operation / parameter setting via the RMGViewTME diagnostic software
- DIN-DVGW tested
Do you have any questions about:
Turbine Meter TME 400-VCF / TME 400-VMF
Please contact us if you have any questions or need help. Our employees are always there for you.