Gas Quality calorimeter RGQ 5
The RGQ 5 is a low CAPEX gas analyzer designed for continuous measurement of combustible gases. The device displays the properties (HS, HI, WIS, WlI, ρ, Z, s-AFR, MZ, CO2, H2 Vol%) of the gas compositions every second.
Gas flows at a low flow rate (30 ml/min) through ¼" NPT connections into the RGQ 5. A 4-20 mA analog signal and a Modbus RTU interface are available as output signals.
The RGQ 5 uses patented gas viscometer technology in combination with other MEMS sensors. The analyzer was specially developed for biomethane injection, hydrogen admixture, combustion control, gas network monitoring and other stationary applications.
Gas flows at a low flow rate (30 ml/min) through ¼" NPT connections into the RGQ 5. A 4-20 mA analog signal and a Modbus RTU interface are available as output signals.
The RGQ 5 uses patented gas viscometer technology in combination with other MEMS sensors. The analyzer was specially developed for biomethane injection, hydrogen admixture, combustion control, gas network monitoring and other stationary applications.
No auxiliary gases ( carrier, calibration gases) necessary
No recalibration necessary
A measurement every second
High precision measurement
Compact design
Also available as mobile device
Output data:
- Wobbe Index (WIS & WII)
- Calorific value (HS & HI)
- H2 und CO2 Vol-% (optional)
- Density, Relative density, Compressibility
- Air/fuel ratio
- Methane number MN
| Ultraschallgaszähler USM GT400 | |
|---|---|
| Accuracy: |
|
| Maintenance-free and reliable |
|
| Fast and consistent measurement |
|
| Additional feature: |
|
| Additional feature: |
|
Gas Quality calorimeter RGQ 3
The RGQ 3 is a mobile calorific value determination with cloud connection. Due to the low CAPEX, it has been developed for flexible measurement of combustible gases. The device supplies the properties (HS, HI, WIS, WlI, ρ, Z, s-AFR, MZ, CO2, H2 Vol%) of the gas compositions every second.
Gas flows through the RGQ 3 at a low flow rate (50 ml/min). All measured values are available via Bluetooth on the connected device with the RMG app and can be passed on to a cloud.
The RGQ 3 uses patented gas viscometer technology in combination with other MEMS sensors. The analyzer was specially developed for biomethane injection, hydrogen admixture, combustion control, gas network monitoring and other stationary applications.
Gas flows through the RGQ 3 at a low flow rate (50 ml/min). All measured values are available via Bluetooth on the connected device with the RMG app and can be passed on to a cloud.
The RGQ 3 uses patented gas viscometer technology in combination with other MEMS sensors. The analyzer was specially developed for biomethane injection, hydrogen admixture, combustion control, gas network monitoring and other stationary applications.
High measurement accuracy and repeatability
Built-in inlet pressure control up to max. 10 bar
Mobile calorific value determination with cloud connection
Thermal conductivity and CO2 reading every second
Battery supply or USB charging socket as power supply
Plug-and-play installation and operation
Output data:
- Wobbe Index (WIS & WII)
- Calorific value (HS & HI)
- H2 und CO2 Vol-% (optional)
- Density, relative density, compressibility
- Air/fuel ratio
- Methane number MN
| Ultraschallgaszähler USM GT400 | |
|---|---|
| Accuracy: |
|
| Maintenance-free and reliable |
|
| Fast and consistent measurement |
|
| Additional feature: |
|
| Additional feature: |
|
Technical Product Information & Software
RGQ 5 / RGQ 3
Leaflet, PDF (2mb)
RGQ5-RS485-Interface-3-2-1
Software (92mb)
EU-DoC_RGQ-C_2023-11-02_signed
Declaration of Conformity (175kb)
RGQ 3
Leaflet, PDF (1,4 mb)
RS485 to USB driver
Software (230kb)
Operating and maintenance instructions
RGQ 5 Modbus Manual v01
PDF (457kb)
RGQ 3 Manual v01
PDF (5.4 mb)
RGQ 5 Manual v02
PDF (6.48 mb)
RGQ-C Manual
PDF (5.8 mb)
Do you have any questions about:
Gas Quality calorimeter RGQ 5 / RGQ 3
Please contact us if you have any questions or need help. Our employees are always there for you.