Logo-RMG
Deutsch
English
Español
Polski
Français
Italiano
中文
  • Société
    • Gestion et philosophie
    • Histoire
    • Principes de conduite
    • Conditions générales
    • Contactez
      • Contact - Gestion des produits
      • Contact - Systèmes
      • Contact du service
      • Contact commercial
    • Certificat
    • Sites
    • Entreprises partenaires
  • Carrière
    • Postes vacants
  • Nous contacter
    • Contact - Gestion des produits
    • Contact - Systèmes
    • Contact du service
    • Contact de vente
    • Sites
    • Enregistrement du dispositif
    • Participation aux salons professionnels
  • Applications
    • Mesures du gaz naturel
      • Gaz naturel - mesure du volume
      • Gaz naturel - mesure et conversion de l'énergie
      • Gaz naturel - mesure de la qualité du gaz
  • Mesures de l'hydrogène
    • Hydrogène - mesure du volume
    • Hydrogène - mesure de l'énergie
    • Hydrogène - mesure de la composition des gaz
  • Technologie de mesure des gaz
    • Compteur de gaz
      • Compteur de gaz à ultrasons
        • USM GT400-6P
        • USM GT400-3P
        • RSM 200
      • Compteur de gaz de turbine
        • TME 400-VCF / TME 400-VMF
        • TRZ 03
      • Volumètre à gaz
        • TRZ 03 K
        • TME 400-VC
        • TME 400-VM
    • Équipement d'analyse des gaz
      • Chromatographe en phase gazeuse PGC 9300
      • Calorimètre à qualité de gaz RGQ 5 / RGQ 3
      • Chromatographe en phase gazeuse de process RGC 7
    • Correcteur de volume
      • Flow Computer RFC 7
      • Ordinateur de flux ERZ 2000-DI
      • Ordinateur de flux ERZ 2000-NG
      • EVC Primus 400
      • EVC EC 900
    • Enregistreurs
      • Dispositif d'enregistrement des valeurs mesurées Prilog 400
    • Dispositifs de communication
      • Unité de transmission de données à distance DFÜ-NG
    • Analytics by RMG
    • Logiciels
      • RMG - Gestion des compteurs de gaz
      • RMG - Lecture de données à distance ZFA avec WICO22
      • Acquisition et fourniture de données de mesure professionnelles
  • Systèmes de détection de gaz
    • Systèmes pour les stations de transfert de gaz
    • Systèmes d'analyse des gaz
  • Service
    • Contact du service
    • Service clientèle
    • Chromatographe à gaz mobile
    • Installation d'essai à haute pression
    • Produits abandonnés
  • Académie RMG
    • Séminaires et formations
      • Séminaire A1 - Compteurs de gaz à ultrasons
      • Séminaire B1 - Flow Computer
      • Séminaire B2 - Convertisseur compact
      • Séminaire C1 - Chromatographe en phase gazeuse
      • Séminaire D - Bus DSfG
      • Séminaire C2 - Mesure corrélative de la qualité des gaz
      • Séminaire E - Droit de la métrologie légale
      • Séminaire G - Communication de données
      • Séminaire H - Techniques de mesure pour les applications H2
      • Séminaire P - Séminaire pour planificateurs
      • Séminaire I - Applications industrielles
      • Séminaire U - Mises à jour techniques pour les organismes de contrôle
  • Publications
    • Documentation technique
      • Archives
      • Fichiers à télécharger
        • Fichiers CAO 3D - Unité d'alimentation en gaz
        • Fichiers CAO 3D - USZ08
        • Fichiers CAO 3D - USM GT400
        • Fichiers CAO 3D - TRZ03
        • Fichiers CAO 3D - TME400VM
        • Fichiers CAO 3D - TME400VCF
        • Fichiers CAO 3D - TME400VC
        • Fichiers CAO 3D - PGC930X
        • Fichiers CAO 3D - TRZ 03 K
        • Informations sur le produit GT400
        • Fichiers CAO 3D - RGC 7
        • Fichiers CAO 3D - RSM 200
        • Informations sur le produit TME 400-VCF / TME 400-VMF
        • Informations produit RGQ 5 / RGQ 3
        • Information sur le produit Prilog 400
        • Informations sur le produit DFÜ-NG
        • Information sur le produit ERZ 2000-DI
        • Information sur le produit ERZ 2000-NG
        • Informations sur le produit EC 900
        • Informations sur le produit Primus 400
        • Information sur le produit TME 400-VM
        • Information sur le produit TME 400-VC
        • Information sur le produit TRZ 03 K
        • Informations sur le produit TRZ 03
        • Informations sur le produit PGC 9300
        • Informations sur le produit USZ 08
        • Information sur le produit ENCO 08
        • Produits abandonnés
        • Informations produit RSM 200
        • Informations sur le produit RGC 7
        • Informations sur le produit RFC 7
    • Notes techniques
    • Outils en ligne
      • Dimensionnement des compteurs
      • Calculs selon la norme ISO 6976
    • Bulletin d'information
    • Presse
    • Case Study
  • Technologie de mesure des gaz
  • Compteur de gaz
  • Compteur de gaz à ultrasons
  • USM GT400-6P

Compteur de gaz à ultrasons USM GT400-6P


Notre vaisseau amiral : la plus grande précision et les plus grandes portées de mesure
La série GT400 est le résultat haut de gamme du développement continu de la technologie des compteurs à ultrasons. Dès le lancement sur le marché du premier compteur à ultrasons de RMG en 1999, le principe de la mesure à 6 voies a été appliqué pour le comptage des transferts de garde. La quatrième génération actuelle dispose de l'instrument de mesure optimal pour la mesure précise de grands débits à haute pression dans les pipelines et les stations de transfert de gaz.

Grâce à la conception résistante à la pression de la technologie du capteur, un niveau de puissance acoustique particulièrement élevé est disponible, ce qui rend le compteur insensible aux interférences, même dans des conditions d'installation critiques.
Haute précision et fiabilité de mesure pour une utilisation dans les comptages fiscaux et non fiscaux
Applicable des applications à pression atmosphérique aux applications à haute pression
Étalonnage à l'air avec test haute pression selon TR G7
Les capteurs peuvent être facilement remplacés sur site via des connexions enfichables sans recalibrage
Grande stabilité contre les pré-interférences grâce à 6 voies de mesure directes
Paramétrage du fonctionnement via le logiciel de diagnostic RMGViewUSM
Appareil de mesure du volume de gaz en métrologie légale
  • MID approuvé par le PTB
  • Grande stabilité contre les pré-interférences grâce à 6 trajets de mesure directs, disposés en X sur 3 plans
  • Testé selon TR G13 / OIML
  • Étalonnage à l'air avec test à haute pression selon TR G7
  • Vitesse d'écoulement élevée (jusqu'à 40 m/s), d'où la possibilité d'utiliser des tailles nominales plus petites
  • Capteurs en titane entièrement encapsulés, robustes et antisalissures
  • Échange de capteurs possible sans recalibrage
  • Applicable de la pression atmosphérique aux applications à haute pression
  • Connexion à l'ordinateur de flux RMG via RS485 / DSfG instance F
  • Fonctionnement / paramétrage via le logiciel de diagnostic RMGViewUSM
  • PTB / MID approuvé
Metrologische Zulassungen MID, PTB Ex-ZulassungenATEX / IECEx Ex de, CSA Ex d
Max. Betriebsdruck pmax150 bar (höhere Drücke auf Anfrage)
Max. DurchflussQmax von 650 m³/h bis 108000 m³/h
NennweitenDN 80 – DN 600 als Standard (andere Nennweiten auf Anfrage)
Messbereichmax. 1 : 270, abhängig von Nennweite und Betriebsdruck. Details siehe Datenblatt.
AnschlussflanschePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (andere Flansche auf Anfrage)
Metrological approvals MID, PTB Ex approvalsATEX / IECEx Ex de, CSA Ex d
Max. Operating pressure pmax150 bar (higher pressures on request)
Max. Flow rateQmax from 650 m³/h to 108000 m³/h
Nominal sizesDN 80 - DN 600 as standard (other nominal sizes on request)
Measuring rangemax. 1 : 270, depending on nominal diameter and operating pressure. See data sheet for details.
Connecting flangesPN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (other flanges on request)
Homologaciones metrológicas MID, PTB Homologaciones ExATEX / IECEx Ex de, CSA Ex d
Máx. Presión de funcionamiento pmax150 bar (presiones superiores bajo pedido)
Máx. CaudalQmax de 650 m³/h a 108000 m³/h
Dimensiones nominalesDN 80 - DN 600 de serie (otros tamaños nominales bajo pedido)
Rango de mediciónmáx. 1 : 270, en función del diámetro nominal y de la presión de funcionamiento. Consulte la hoja de datos para más detalles.
Bridas de conexiónPN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (otras bridas bajo pedido)
Zatwierdzenia metrologiczne MID, PTB ExATEX / IECEx Ex de, CSA Ex d
Maks. Ciśnienie robocze pmax150 bar (wyższe ciśnienia na żądanie)
Maks. Natężenie przepływuQmax od 650 m³/h do 108000 m³/h
Rozmiary nominalneDN 80 - DN 600 w standardzie (inne rozmiary nominalne na żądanie)
Zakres pomiarowymaks. 1 : 270, w zależności od średnicy nominalnej i ciśnienia roboczego. Szczegółowe informacje można znaleźć w arkuszu danych.
Kołnierze łączącePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (inne kołnierze na zamówienie)
Agréments métrologiques MID, PTB Agréments ExATEX / IECEx Ex de, CSA Ex d
Pression max. Pression de service pmax150 bar (pressions plus élevées sur demande)
Débit max. DébitQmax de 650 m³/h à 108000 m³/h
Diamètres nominauxDN 80 - DN 600 en standard (autres diamètres nominaux sur demande)
Plage de mesuremax. 1 : 270, en fonction du diamètre nominal et de la pression de service. Pour plus de détails, voir la fiche technique.
Brides de raccordementPN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (autres brides sur demande)
Approvazioni metrologiche MID, PTB Approvazioni ExATEX / IECEx Ex de, CSA Ex d
Max. Pressione di esercizio pmax150 bar (pressioni superiori su richiesta)
Massima. PortataQmax da 650 m³/h a 108000 m³/h
Dimensioni nominaliDN 80 - DN 600 di serie (altre dimensioni nominali su richiesta)
Campo di misuramax. 1 : 270, a seconda del diametro nominale e della pressione di esercizio. Per i dettagli, consultare la scheda tecnica.
Flange di collegamentoPN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (altre flange su richiesta)
Metrologische Zulassungen MID, PTB Ex-ZulassungenATEX / IECEx Ex de, CSA Ex d
Max. Betriebsdruck pmax150 bar (höhere Drücke auf Anfrage)
Max. DurchflussQmax von 650 m³/h bis 108000 m³/h
NennweitenDN 80 – DN 600 als Standard (andere Nennweiten auf Anfrage)
Messbereichmax. 1 : 270, abhängig von Nennweite und Betriebsdruck. Details siehe Datenblatt.
AnschlussflanschePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (andere Flansche auf Anfrage)
Metrologische Zulassungen MID, PTB Ex-ZulassungenATEX / IECEx Ex de, CSA Ex d
Max. Betriebsdruck pmax150 bar (höhere Drücke auf Anfrage)
Max. DurchflussQmax von 650 m³/h bis 108000 m³/h
NennweitenDN 80 – DN 600 als Standard (andere Nennweiten auf Anfrage)
Messbereichmax. 1 : 270, abhängig von Nennweite und Betriebsdruck. Details siehe Datenblatt.
AnschlussflanschePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (andere Flansche auf Anfrage)
Metrologische Zulassungen MID, PTB Ex-ZulassungenATEX / IECEx Ex de, CSA Ex d
Max. Betriebsdruck pmax150 bar (höhere Drücke auf Anfrage)
Max. DurchflussQmax von 650 m³/h bis 108000 m³/h
NennweitenDN 80 – DN 600 als Standard (andere Nennweiten auf Anfrage)
Messbereichmax. 1 : 270, abhängig von Nennweite und Betriebsdruck. Details siehe Datenblatt.
AnschlussflanschePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (andere Flansche auf Anfrage)
计量批准MID、PTB Ex批准ATEX/IECEx Ex de、CSA Ex d
最大工作压力pmax150 bar(根据要求提供更高压力)
最大流量Qmax从650立方米/小时到108000立方米/小时
标称尺寸标准DN 80-DN 600(根据要求提供其他标称尺寸)
测量范围最大值1:27 0,取决于公称直径和工作压力。有关详细信息,请参见数据表。
连接法兰PN 10、PN 16、ANSI 150、ANSI 300、ANSI 600、ANSI 900*(根据要求提供其他法兰)
Metrologische Zulassungen MID, PTB Ex-ZulassungenATEX / IECEx Ex de, CSA Ex d
Max. Betriebsdruck pmax150 bar (höhere Drücke auf Anfrage)
Max. DurchflussQmax von 650 m³/h bis 108000 m³/h
NennweitenDN 80 – DN 600 als Standard (andere Nennweiten auf Anfrage)
Messbereichmax. 1 : 270, abhängig von Nennweite und Betriebsdruck. Details siehe Datenblatt.
AnschlussflanschePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (andere Flansche auf Anfrage)
Metrologische Zulassungen MID, PTB Ex-ZulassungenATEX / IECEx Ex de, CSA Ex d
Max. Betriebsdruck pmax150 bar (höhere Drücke auf Anfrage)
Max. DurchflussQmax von 650 m³/h bis 108000 m³/h
NennweitenDN 80 – DN 600 als Standard (andere Nennweiten auf Anfrage)
Messbereichmax. 1 : 270, abhängig von Nennweite und Betriebsdruck. Details siehe Datenblatt.
AnschlussflanschePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (andere Flansche auf Anfrage)
Metrologische Zulassungen MID, PTB Ex-ZulassungenATEX / IECEx Ex de, CSA Ex d
Max. Betriebsdruck pmax150 bar (höhere Drücke auf Anfrage)
Max. DurchflussQmax von 650 m³/h bis 108000 m³/h
NennweitenDN 80 – DN 600 als Standard (andere Nennweiten auf Anfrage)
Messbereichmax. 1 : 270, abhängig von Nennweite und Betriebsdruck. Details siehe Datenblatt.
AnschlussflanschePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (andere Flansche auf Anfrage)
Metrologische Zulassungen MID, PTB Ex-ZulassungenATEX / IECEx Ex de, CSA Ex d
Max. Betriebsdruck pmax150 bar (höhere Drücke auf Anfrage)
Max. DurchflussQmax von 650 m³/h bis 108000 m³/h
NennweitenDN 80 – DN 600 als Standard (andere Nennweiten auf Anfrage)
Messbereichmax. 1 : 270, abhängig von Nennweite und Betriebsdruck. Details siehe Datenblatt.
AnschlussflanschePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (andere Flansche auf Anfrage)
Metrologische Zulassungen MID, PTB Ex-ZulassungenATEX / IECEx Ex de, CSA Ex d
Max. Betriebsdruck pmax150 bar (höhere Drücke auf Anfrage)
Max. DurchflussQmax von 650 m³/h bis 108000 m³/h
NennweitenDN 80 – DN 600 als Standard (andere Nennweiten auf Anfrage)
Messbereichmax. 1 : 270, abhängig von Nennweite und Betriebsdruck. Details siehe Datenblatt.
AnschlussflanschePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (andere Flansche auf Anfrage)
Metrologische Zulassungen MID, PTB Ex-ZulassungenATEX / IECEx Ex de, CSA Ex d
Max. Betriebsdruck pmax150 bar (höhere Drücke auf Anfrage)
Max. DurchflussQmax von 650 m³/h bis 108000 m³/h
NennweitenDN 80 – DN 600 als Standard (andere Nennweiten auf Anfrage)
Messbereichmax. 1 : 270, abhängig von Nennweite und Betriebsdruck. Details siehe Datenblatt.
AnschlussflanschePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (andere Flansche auf Anfrage)
Metrologische Zulassungen MID, PTB Ex-ZulassungenATEX / IECEx Ex de, CSA Ex d
Max. Betriebsdruck pmax150 bar (höhere Drücke auf Anfrage)
Max. DurchflussQmax von 650 m³/h bis 108000 m³/h
NennweitenDN 80 – DN 600 als Standard (andere Nennweiten auf Anfrage)
Messbereichmax. 1 : 270, abhängig von Nennweite und Betriebsdruck. Details siehe Datenblatt.
AnschlussflanschePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (andere Flansche auf Anfrage)
Metrologische Zulassungen MID, PTB Ex-ZulassungenATEX / IECEx Ex de, CSA Ex d
Max. Betriebsdruck pmax150 bar (höhere Drücke auf Anfrage)
Max. DurchflussQmax von 650 m³/h bis 108000 m³/h
NennweitenDN 80 – DN 600 als Standard (andere Nennweiten auf Anfrage)
Messbereichmax. 1 : 270, abhängig von Nennweite und Betriebsdruck. Details siehe Datenblatt.
AnschlussflanschePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (andere Flansche auf Anfrage)
Metrologische Zulassungen MID, PTB Ex-ZulassungenATEX / IECEx Ex de, CSA Ex d
Max. Betriebsdruck pmax150 bar (höhere Drücke auf Anfrage)
Max. DurchflussQmax von 650 m³/h bis 108000 m³/h
NennweitenDN 80 – DN 600 als Standard (andere Nennweiten auf Anfrage)
Messbereichmax. 1 : 270, abhängig von Nennweite und Betriebsdruck. Details siehe Datenblatt.
AnschlussflanschePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (andere Flansche auf Anfrage)
Metrologische Zulassungen MID, PTB Ex-ZulassungenATEX / IECEx Ex de, CSA Ex d
Max. Betriebsdruck pmax150 bar (höhere Drücke auf Anfrage)
Max. DurchflussQmax von 650 m³/h bis 108000 m³/h
NennweitenDN 80 – DN 600 als Standard (andere Nennweiten auf Anfrage)
Messbereichmax. 1 : 270, abhängig von Nennweite und Betriebsdruck. Details siehe Datenblatt.
AnschlussflanschePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (andere Flansche auf Anfrage)
Metrologische Zulassungen MID, PTB Ex-ZulassungenATEX / IECEx Ex de, CSA Ex d
Max. Betriebsdruck pmax150 bar (höhere Drücke auf Anfrage)
Max. DurchflussQmax von 650 m³/h bis 108000 m³/h
NennweitenDN 80 – DN 600 als Standard (andere Nennweiten auf Anfrage)
Messbereichmax. 1 : 270, abhängig von Nennweite und Betriebsdruck. Details siehe Datenblatt.
AnschlussflanschePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (andere Flansche auf Anfrage)
Metrologische Zulassungen MID, PTB Ex-ZulassungenATEX / IECEx Ex de, CSA Ex d
Max. Betriebsdruck pmax150 bar (höhere Drücke auf Anfrage)
Max. DurchflussQmax von 650 m³/h bis 108000 m³/h
NennweitenDN 80 – DN 600 als Standard (andere Nennweiten auf Anfrage)
Messbereichmax. 1 : 270, abhängig von Nennweite und Betriebsdruck. Details siehe Datenblatt.
AnschlussflanschePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (andere Flansche auf Anfrage)
Metrologische Zulassungen MID, PTB Ex-ZulassungenATEX / IECEx Ex de, CSA Ex d
Max. Betriebsdruck pmax150 bar (höhere Drücke auf Anfrage)
Max. DurchflussQmax von 650 m³/h bis 108000 m³/h
NennweitenDN 80 – DN 600 als Standard (andere Nennweiten auf Anfrage)
Messbereichmax. 1 : 270, abhängig von Nennweite und Betriebsdruck. Details siehe Datenblatt.
AnschlussflanschePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (andere Flansche auf Anfrage)
Metrologische Zulassungen MID, PTB Ex-ZulassungenATEX / IECEx Ex de, CSA Ex d
Max. Betriebsdruck pmax150 bar (höhere Drücke auf Anfrage)
Max. DurchflussQmax von 650 m³/h bis 108000 m³/h
NennweitenDN 80 – DN 600 als Standard (andere Nennweiten auf Anfrage)
Messbereichmax. 1 : 270, abhängig von Nennweite und Betriebsdruck. Details siehe Datenblatt.
AnschlussflanschePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (andere Flansche auf Anfrage)
Metrologische Zulassungen MID, PTB Ex-ZulassungenATEX / IECEx Ex de, CSA Ex d
Max. Betriebsdruck pmax150 bar (höhere Drücke auf Anfrage)
Max. DurchflussQmax von 650 m³/h bis 108000 m³/h
NennweitenDN 80 – DN 600 als Standard (andere Nennweiten auf Anfrage)
Messbereichmax. 1 : 270, abhängig von Nennweite und Betriebsdruck. Details siehe Datenblatt.
AnschlussflanschePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (andere Flansche auf Anfrage)
Metrologische Zulassungen MID, PTB Ex-ZulassungenATEX / IECEx Ex de, CSA Ex d
Max. Betriebsdruck pmax150 bar (höhere Drücke auf Anfrage)
Max. DurchflussQmax von 650 m³/h bis 108000 m³/h
NennweitenDN 80 – DN 600 als Standard (andere Nennweiten auf Anfrage)
Messbereichmax. 1 : 270, abhängig von Nennweite und Betriebsdruck. Details siehe Datenblatt.
AnschlussflanschePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (andere Flansche auf Anfrage)
Metrologische Zulassungen MID, PTB Ex-ZulassungenATEX / IECEx Ex de, CSA Ex d
Max. Betriebsdruck pmax150 bar (höhere Drücke auf Anfrage)
Max. DurchflussQmax von 650 m³/h bis 108000 m³/h
NennweitenDN 80 – DN 600 als Standard (andere Nennweiten auf Anfrage)
Messbereichmax. 1 : 270, abhängig von Nennweite und Betriebsdruck. Details siehe Datenblatt.
AnschlussflanschePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (andere Flansche auf Anfrage)
Metrologische Zulassungen MID, PTB Ex-ZulassungenATEX / IECEx Ex de, CSA Ex d
Max. Betriebsdruck pmax150 bar (höhere Drücke auf Anfrage)
Max. DurchflussQmax von 650 m³/h bis 108000 m³/h
NennweitenDN 80 – DN 600 als Standard (andere Nennweiten auf Anfrage)
Messbereichmax. 1 : 270, abhängig von Nennweite und Betriebsdruck. Details siehe Datenblatt.
AnschlussflanschePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (andere Flansche auf Anfrage)
Metrologische Zulassungen MID, PTB Ex-ZulassungenATEX / IECEx Ex de, CSA Ex d
Max. Betriebsdruck pmax150 bar (höhere Drücke auf Anfrage)
Max. DurchflussQmax von 650 m³/h bis 108000 m³/h
NennweitenDN 80 – DN 600 als Standard (andere Nennweiten auf Anfrage)
Messbereichmax. 1 : 270, abhängig von Nennweite und Betriebsdruck. Details siehe Datenblatt.
AnschlussflanschePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (andere Flansche auf Anfrage)
Metrologische Zulassungen MID, PTB Ex-ZulassungenATEX / IECEx Ex de, CSA Ex d
Max. Betriebsdruck pmax150 bar (höhere Drücke auf Anfrage)
Max. DurchflussQmax von 650 m³/h bis 108000 m³/h
NennweitenDN 80 – DN 600 als Standard (andere Nennweiten auf Anfrage)
Messbereichmax. 1 : 270, abhängig von Nennweite und Betriebsdruck. Details siehe Datenblatt.
AnschlussflanschePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (andere Flansche auf Anfrage)
Metrologische Zulassungen MID, PTB Ex-ZulassungenATEX / IECEx Ex de, CSA Ex d
Max. Betriebsdruck pmax150 bar (höhere Drücke auf Anfrage)
Max. DurchflussQmax von 650 m³/h bis 108000 m³/h
NennweitenDN 80 – DN 600 als Standard (andere Nennweiten auf Anfrage)
Messbereichmax. 1 : 270, abhängig von Nennweite und Betriebsdruck. Details siehe Datenblatt.
AnschlussflanschePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (andere Flansche auf Anfrage)
Metrologische Zulassungen MID, PTB Ex-ZulassungenATEX / IECEx Ex de, CSA Ex d
Max. Betriebsdruck pmax150 bar (höhere Drücke auf Anfrage)
Max. DurchflussQmax von 650 m³/h bis 108000 m³/h
NennweitenDN 80 – DN 600 als Standard (andere Nennweiten auf Anfrage)
Messbereichmax. 1 : 270, abhängig von Nennweite und Betriebsdruck. Details siehe Datenblatt.
AnschlussflanschePN 10, PN 16, ANSI 150, ANSI 300, ANSI 600, ANSI 900* (andere Flansche auf Anfrage)
Données sur la taille et les performances
Diamètre nominal
DN

Longueur totale**

en mm

Débit volumique min.

Qmin

en m³/h

Max. Débit

Qmax

en m³/h

Taille des compteurs

G

80 (3“)

2405650

160/250/400

100 (4“)

30081000

250/400/650

150 (6“)

450202400

650/1000/1600

200 (8“)

600324200

1000/1600/2500

250 (10“)

750506600

1600/2500/4000

300 (12“)

900709400

2500/4000/6500

350 (14") 1050 90 11400 4000/6500/10000

400 (16“)

120012015000

4000/6500/10000

450 (18") 1350 150 19000 6500/10000/16000

500 (20“)

150018023500

6500/10000/16000

600 (24“)

120026034000

10000/16000/25000

700 (28“)*

120042052000

10000/16000/25000

750 (30“)*

150046060000

10000/16000/25000

800 (32“)*

150055068000

16000/25000/40000

900 (36“)*

150070086000

16000/25000/40000

1000 (40“)*

1500850108000

25000/40000/65000

LoremLipsum
*) Diamètres nominaux > ; DN 600 sur demande.
**) Pour les sections de comptage de transfert de garde, un tuyau d'entrée droit de 10 x DN ou de 5 x DN avec redresseur à plaque perforée et un tuyau de sortie de 3 x DN doivent être installés.
Informations techniques sur les produits et les logiciels
USM GT400 EN
Leaflet, PDF (3,21 mb)
RMGViewUSMInstaller6.0.0.4
Logiciel, zip (15,3mb)
EU-DoC-USM-GT-400-2024-12-19
Déclaration de conformité, PDF (707 kb)
EU-DoC_USM 400-CP_2022-03-18
Déclaration de conformité, PDF (286kb)
Instructions d'utilisation et d'entretien
RMGView_USM_20_EN
Manual, PDF (3mb)
USM GT400 EN
Manuel, PDF (13.1 mb)

Si vous avez des questions :

USM GT400 Ultrasonic Gas Meter

N'hésitez pas à nous contacter si vous avez des questions ou si vous avez besoin d'aide. Nos employés sont toujours là pour vous.
captcha
The fields marked with * are mandatory fields.
Submit Form
Technologie de mesure des gaz
  • Compteur de gaz
  • Équipement d'analyse des gaz
  • Correcteur de volume
  • Enregistreurs
  • Dispositifs de communication
  • Analytics by RMG
  • Logiciels
Systèmes de gaz
  • Systèmes pour les stations de transfert de gaz
  • Systèmes d'analyse des gaz
Service
  • Systèmes pour les stations de transfert de gaz
  • Systèmes d'analyse des gaz
Académie RMG
  • Séminaires et formations
Société
  • Gestion et philosophie
  • Histoire
  • Principes de conduite
  • Conditions générales
  • Contactez
  • Certificat
  • Sites
  • Entreprises partenaires
Aide
  • Contact - Gestion des produits
  • Contact - Systèmes
  • Contact du service
  • Contact de vente
  • Sites
  • Enregistrement du dispositif
  • Participation aux salons professionnels
  • Plan du site
  • Avis juridique
  • Protection des données
Demande
RMG Messtechnik GmbH
Otto-Hahn-Straße 5 35510 Butzbach Allemagne
+49 6033 897 0