RMG UKA 470-VM „Vector Module“
Below-ground Compact Module
| Application | RMG’s below-ground compact RMG 470 VM “Vector Module” has the same components as any standard gas pressure regulator |
|---|---|
| Very convenient when space is tight (e.g., due to public circulation areas or when architecture rules out structures above ground) | |
| Above-ground stack takes up all vent and discharge lines | |
| All components sit in a solid steel body | |
| Easy to maintain thanks to removable components. | |
| Large outlet pressure range | |
| Suitable for natural, non-aggressive and manufactured gases; nitrogen, carbon dioxide and propane; and other gases upon enquiry | |
| Optional: Safety Relief Valves (SRV) RMG 835 or RMG 832 |
|
| CE registration according to PED | |
| Max. inlet pressure pu max | up to 16 bar |
| Outlet pressure range | 20 mbar to 4 bar (RMG 402/620) |
| SSV setting range Wdo | 50 mbar to 5.2 bar |
| Connection | Flange PN 16/Class 150 according to ANSI 16.5 |
| Temperature range | –10 °C to +60 °C and –20 °C to +60 °C |
All mechanical components of this device are without potential ignition sources
and / or hot faces. They are not subject to ATEX 95 (94/9/EC).
All electronic accessories, on the other hand, meet ATEX requirements.
and / or hot faces. They are not subject to ATEX 95 (94/9/EC).
All electronic accessories, on the other hand, meet ATEX requirements.
To topRMG UKA 470-VM
