BD-RMG 680 “Vector Module™”
Below-ground Compact Module
| Application | RMG’s below-ground compact module 680 Vector has the same components as any gas pressure regulator system and is suitable for distribution/gas networks |
|---|---|
| Easy to install in urban and rural environments | |
| Above-ground stack takes up all vent and discharge lines | |
| All components sit in a solid steel body | |
| Designed to deliver high flows even at low inlet pressures with very small differential pressures | |
| Installation below ground reduces risk of damage and vandalism | |
| Applicable for gases according to DVGW Worksheet G 260 and neutral, nonaggressive gases. Other gases up on enquiry | |
| Max. inlet pressure pu max | up to 7 bar |
| Outlet pressure range | 18 mbar to 80 mbar |
| Variant | Slam/Active, Monitor Active, Slam/Monitor/Active |
| Connection | Flange PN 16 |
| Pipe sizes | Inlet: DN 200, DN 250, DN 300 Outlet: DN 200, DN 250, DN 300 |
| Size of regulator | 150 mm |
| Temperature range | –10 °C to +60 °C |
All mechanical components of this device are without potential ignition sources
and / or hot faces. They are not subject to ATEX 95 (94/9/EC).
All electronic accessories, on the other hand, meet ATEX requirements.
and / or hot faces. They are not subject to ATEX 95 (94/9/EC).
All electronic accessories, on the other hand, meet ATEX requirements.
To top
