BD-RMG 280 Vector Module
Below-ground Compact Module
| Application | RMG’s below-ground compact module 280 Vector has the same components as any gas pressure regulator system and is suitable for distribution/gas networks |
|---|---|
| Easy to install in urban and rural environments | |
| Above-ground stack takes up all vent and discharge lines | |
| All components sit in a solid steel body | |
| Wide outlet pressure range | |
| Easy to maintain | |
| Cartridge design makes it easy to maintain | |
| Installation below ground reduces risk of damage and vandalism | |
| Gas pressure regulator may be either direct-acting or auxiliary-controlled | |
| Suitable for natural, non-aggressive and manufactured gases; nitrogen, carbon dioxide and propane; and other gases upon enquiry | |
| Optional | Safety Shut-off Valve for over-pressure Safety Shut-off Valve for over-pressure and under-pressure |
| CE registration according to PED | |
| Max. inlet pressure pu max | up to 4 bar |
| Outlet pressure range | 10 mbar to 138 mbar (other ranges on request) |
| Slam/Active configuration | Flows up to 8800 m³/h (AC2.5 DN 150 x 80 x 150) |
| Connection | Flange PN 16 or ANSI Class 150 |
| Pipe sizes | Inlet: DN 80, DN 100, DN 150 Outlet: DN 80, DN 100, DN 150 |
| Size of regulator | 50 and 80 mm |
| Temperature range | –10 °C to +60 °C |
All mechanical components of this device are without ignition sources. As such,they are not subject to ATEX 95 (94/9/EC). All electrical components used with this device fulfil the ATEX requirements.
To top
