BD-RMG "mini-Krysalis 19"™
Below-ground Compact Module Type “mini Krysalis”
| Application | RMG’s below-ground compact module mini Krysalis 19TM has the same components as any standard gas pressure regulator and is suitable for distribution/ transmission networks |
|---|---|
| All active parts can be easily replaced | |
| Easy to install in urban and rural environments | |
| Requires minimum amount of space | |
| Above-ground stack takes up all vent and discharge lines | |
| Filter chamber is a separate unit so that elements can be easily replaced without removing main regulating unit | |
| All components sit in a solid steel body | |
| Below-ground installation on the main line | |
| Quiet operation | |
| Wide outlet pressure range | |
| Easy to maintain | |
| Installation below ground reduces risk of damage and vandalism | |
| Suitable for natural, non-aggressive and manufactured gases; nitrogen, carbondioxide and propane; and other gases upon enquiry | |
| CE registration according to PED | |
| Max. inlet pressure pu max | up to 19 bar |
| Outlet pressure range | up to 7 bar max. |
| Flow rate coefficient KG with | Slam/Active = 2,000 m³ / (h · bar) Monitor/Active = 1,600 m³ / (h · bar) Slam/Monitor/Active = 1,500 m³ / (h · bar) |
| Connection | Flange PN 16 or ANSI Class 150 |
| Pipe sizes | Inlet: DN 50, DN 80, DN 100 and DN 150 Outlet: DN 100 and DN 150 |
| Temperature range | –10 °C to +60 °C |
All mechanical components of this device are without potential ignition sources
and / or hot faces. They are not subject to ATEX 95 (94/9/EC).
All electronic accessories, on the other hand, meet ATEX requirements.
and / or hot faces. They are not subject to ATEX 95 (94/9/EC).
All electronic accessories, on the other hand, meet ATEX requirements.
To top
