Safety shut-off valve BD-RMG 303 MK5
Safety Shut-off Valve
| Application | May be used as a protection system for gas supplies and networks |
|---|---|
| To be installed on the inlet pressure side with an external measuring line leading to the outlet pressure side in order to ensure automatic closing of the station in the event of overpressure | |
| Operates with high accuracy and reliability | |
| Pushbutton for pressure compensating valve | |
| Re-engage by hand | |
| Low pressure loss – fully-automatic operation – no external power supply required | |
| Suitable for natural, non-aggressive and manufactured gases; nitrogen, carbon dioxide and propane; and other gases upon enquiry | |
| CE registration according to PED | |
| Max. inlet pressure pmax | up to 7 bar |
| Setting range | - Series 303LP: 0.037 to 0.48 bar |
| - Series 303MP: 0.42 to 4.5 bar | |
| Pipe sizes | DN 250, DN 300 |
| Temperature range | –20 °C to +60 °C |
All mechanical components of this device are without potential ignition sources
and / or hot faces. They are not subject to ATEX 95 (94/9/EC).
All electronic accessories, on the other hand, meet ATEX requirements.
and / or hot faces. They are not subject to ATEX 95 (94/9/EC).
All electronic accessories, on the other hand, meet ATEX requirements.
To top
