Flow Control Valve RMG 530-P

Flow Control Valve with Pneumatic Actuator with Electrical/Pneumatic Position Control for Flow and Pressure Control Loops According to DIN EN 334

Application	Unit for volume and pressure control tasks
	High flow rate coefficient due to axial flow
	Valve sleeve with full pressure compensation
	May be operated bi-directionally
	Bubble-tight shut-off
	Optional design with noise reduction
	In case of current failure, valve may either remain in last position or closes at option
	Suitable for non-aggressive gases, other gases on enquiry

	CE registration according to PED

Max. admissible pressure PS	= 250 bar
Max. inlet pressure p_{u max}	up to 250 bar
Connection	Flange Classes 600, 900 and 1500 according to ANSI 16.5 DN 80/80, DN 100/100, DN 150/150, DN 200/200, DN 250/250, DN 300/300
Class of lock-up pressure zone	SZ 2.5

	All mechanical components of this device are without ignition sources. As such, they are not subject to ATEX 95 (94/9/EC). All electrical components used with this device fulfil the ATEX requirements.

To top