Gas pressure regulator RMG 200
Pilot-operated Gas Pressure Regulator According to DINEN 334
| Application | Device for offtake stations in gas transmission, industrial facilities and low-load lines in larger gas pressure regulating stations |
|---|---|
| Optional outdoor type | |
| Suitable for large turn down ratios | |
| Installation of different valve seat diameters is possible | |
| Straightforward, easy-to-maintain design | |
| Suitable for controlling outlet and inlet pressure, outlet and differential pressure (flow control), and superimposed electric control loops | |
| Fail-close function | |
| Suitable for non-aggressive gases and other gases on enquiry | |
| CE registration according to PED | |
| Max. admissible pressure PS | = 100 bar |
| depending on type of flange | |
| Max. inlet pressure pu max | up to 100 bar |
| Outlet pressure range Wd | 0.02 bar up to 90 bar |
| Min. pressure drop approx. | 1 bar, others on enquiry |
| Class of lock-up pressure zone | SZ 2.5 |
| Connection | - Pipe connections according to DINEN ISO 8434-1 (DIN 2353), for pipe diameters 18 mm, 22 mm, 25 mm, 28 mm, 38 mm, 42 mm; - DIN flange PN 40 or Flange Class 300, Class 600 according to ANSI 16.5 with transition pieces in DN 25, DN 40, DN 50 |
| Supplemental fixture (as requested by customer) | Electrical and pneumatic remote setpoint adjustment |
| Fitted with noise-reducing outlet device flanges PN 40 or Class 600 according to ANSI 16.5 | |
| Pipe connection for use with SSVs RMG 703 and/or 704 | |
All mechanical components of this device are without potential ignition sources
and / or hot faces. They are not subject to ATEX 95 (94/9/EC).
All electronic accessories, on the other hand, meet ATEX requirements.
and / or hot faces. They are not subject to ATEX 95 (94/9/EC).
All electronic accessories, on the other hand, meet ATEX requirements.
To topRMG 200
Technical description
Cut-away views
Operation & maintenance, spare parts
