Gas pressure regulator BD-RMG 277
Gas Pressure Regulator with Spring-loaded Measuring Unit and Reversing Lever
| Application | Device for offtake stations in gas distribution as well as commercial and industrial facilities |
|---|---|
| Diaphragm casing can be rotated through increments of 45° relative to body | |
| Rapid response to load changes | |
| Regulator can be installed in any position | |
| Can be fitted with a over-pressure cut-off valve (OPCO) or combined under-/overpressure cut-off valve (UPCO/OPCO) | |
| Easy to maintain | |
| Suitable for natural, non-aggressive and manufactured gases; nitrogen, carbon dioxide and propane; and other gases upon enquiry | |
| CE registration according to PED | |
| Max. inlet pressure pu max | up to 10 bar |
| Outlet pressure range Wd | 0.01 to 0.5 bar |
| SSV setting range | Wdso 0.35 to 0.6 bar Wdsu 0.01 to 0.03 bar |
| Connection | Flange DN 50 |
| Type | P – without internal Safety Relief Valve (SRV) |
| R – with internal Safety Relief Valve (SRV) | |
| Temperature range | –20 °C to +60 °C |
All mechanical components of this device are without potential ignition sources
and / or hot faces. They are not subject to ATEX 95 (94/9/EC).
All electronic accessories, on the other hand, meet ATEX requirements.
and / or hot faces. They are not subject to ATEX 95 (94/9/EC).
All electronic accessories, on the other hand, meet ATEX requirements.
To top
