Gas pressure regulator BD-RMG 240
Gas Pressure Regulator with Spring-loaded Measuring Unit and Reversing Lever
| Application | Device for offtake stations in gas distribution as well as commercial and industrial facilities |
|---|---|
| Diaphragm casing can be rotated through 360° relative to regulator body | |
| Rapid response to load changes | |
| Wide range of interchangeable orifices | |
| Regulator can be installed in any position | |
| Can be fitted with integral over-pressure (OPCO) or under-/over-pressure cut-off valve (UPCO/OPCO) | |
| Cartridge-type diaphragm and valve assembly for ease of maintenance | |
| Suitable for natural, non-aggressive and manufactured gases; nitrogen, carbon dioxide and propane; and other gases upon enquiry | |
| Max. inlet pressure pu max | up to 10.3 bar |
| Outlet pressure range Wd | 0.01 to 0.21 bar |
| SSV setting range | Wdo 0.035 to 0.26 bar Wdu 0.01 to 0.03 bar |
| Connection | Pipe screw connection R ¾", R 1" |
| Temperature range | –40°C to +60°C |
| Type | P – without internal Safety Relief Valve (SRV) |
| R – with internal Safety Relief Valve (SRV) | |
| LR – internal SRV | |
| SD - safety diaphragm/vent less | |
All mechanical components of this device are without ignition sources. As such, they are not subject to ATEX 95 (94/9/EC). All electrical components used with this device fulfil the ATEX requirements.
To top
