Gas pressure regulator BD-RMG 241
Direct-acting, lever-operated gas pressure regulator
| Application | for domestic, industrial and commercial applications |
|---|---|
| suitable for gases DVGW G 260, other gases on enquiry | |
| diaphragm casing can be rotated through 180° relative to regulator body | |
| rapid response to load changes | |
| wide range of interchangeable orifices | |
| regulator can be installed in any position | |
| can be fitted with integral overpressure (OPCO) or under-/overpressure cut-off valve (UPCO/OPCO) | |
| cartridge type diaphragm and valve assembly for ease of maintenance | |
| PFM application version available (+/- 1% abs.) | |
| approved by DIN-DVGW (SD type) | |
| CSA, AGA, CE and Measurement Canada Approved | |
| Max. inlet pressure pu max | 10.3 bar (dependent upon orifice fitted) |
| Outlet pressure range Wd | 0,010 bar to 0,082 bar |
| Safety shut-off valve setting ranges | Wdo 0,035 to 0,175 bar Wdo 0,010 to 0,030 bar |
| take a look at BD-RMG 309 | |
| Sizes | pipe screw connection without brazing R 1/2", R 3/4", R 1" |
| Temperature range | -20°C to +60°C |
| -40° Fahrenheit to +140° Fahrenheit | |
| Options | P - no internal relief |
| R - internal relief | |
| LR - limited internal relief | |
| SD – safety diaphragm/vent-less | |
To top
