RMG 925 Over-pressure Protection
Over-pressure Protection
| Application | Fulfils the requirements of DVGW worksheet G 491 |
|---|---|
| Compact design | |
| Various fixed response pressures available | |
| With additional connection for pilot measuring/impulse line | |
| Suitable for non-aggressive gases, other gases on enquiry | |
| DVGW registration | |
| SEP design according to PED | |
| Max. admissible pressure PS | = 100 bar |
| Max. operating pressure pmax | up to 100 bar |
| Response pressure (fixed setting) optionally | 0.6 bar / 1 bar / 1.6 bar / 2.5 bar / 4 bar / 6 bar / 10 bar / 16 bar / 25 bar / 40 bar – more on enquiry |
| Connection | Inlet: - Pipe connection DIN EN ISO 8434-1 (DIN 2353) for pipe sizes 10 mm, 12 mm Outlet: - Gauge connection according to DIN EN ISO 228 G 1/4 – or similar to pipe connection |
All mechanical components of this device are without ignition sources. As such, they are not subject to ATEX 95 (94/9/EC). All electrical components used with this device fulfil the ATEX requirements
To topRMG 925
