RMG 905 Fine-mesh Filter
Fine-mesh Filter for Control-gas
| Application | Auxiliary filter (e.g., for pneumatic pilots) |
|---|---|
| For single use and/or as parallel filter blocks (double filter) | |
| Large filter area | |
| High filtration efficiency | |
| Easy maintenance (exchange of filter insert) | |
| Small flow resistance | |
| Suitable for non-aggressive gases, other gases on enquiry | |
| CE registration according to PED in combination with RMG Gas Pressure Regulators According to DIN EN 334, the push button valve is an integral component of this device. |
|
| SEP design according to PED | |
| Max. admissible pressure PS | = 100 (250) bar |
| Max. operating pressure pmax | up to100 (250) bar |
| Grade of filtration | approx. 5 μm |
| Connection | Pipe connections according to DIN EN ISO 8434-1 (DIN 2353), PN 100, for pipe diameter 10 mm |
| Flow rate coefficient KG | = 41 m³/(h ⋅ bar) |
| Maximum operating flow rate Qmmax | = 15 m³/h |
| New filter insert Δp | 0.1 bar |
| Soiled filter insert Δpmax | 1 bar approx. |
All mechanical components of this device are without ignition sources. As such, they are not subject to ATEX 95 (94/9/EC). All electrical components used with this device fulfil the ATEX requirements.
To topRMG 905
Technical description
Operation & maintenance, spare parts
