Electroclock BD-RMG 185/186
Electronic Timer with Solenoid-operated Valve
| Application | Primarily used as a pressure management tool programmed to lower the outlet pressure during periods of low demand, thus reducing network leakage |
|---|---|
| Used in an auxiliary controlled system switching K2 pilot on and off at programmed times | |
| Programmable with up to six different times (3 high and 3 low settings per day on a 7-day cycle) | |
| 2 LEDs for indicating switching positions, and manual push-button override | |
| Complete with low-battery warning | |
| Via an IS barrier interface, time programming and interrogation can be carried out using a laptop or similar | |
| ATEX and EMC approved | |
| IS interface box, cables and programming software available | |
| Suitable for natural, non-aggressive and manufactured gases; nitrogen, carbon dioxide and propane; and other gases upon enquiry | |
| Max. inlet pressure pmax | 0.35 bar |
| Available designs | 185 – Electroclock 2 |
| 186 – Electroclock 2 VS* | |
| *) Installation on vent lines of below-ground compact modules | |
| Temperature range | –20 °C to +60 °C |
To top
